Thank you for replying
It is the ”oil life remaining” that needs a reset.
It is an information in the cluster in the dashboard, maybee exklusive for 2014?
It is not mentioned in the instructonsbook at all.
When pressing the ”T” for some seconds, the contrast inverts (like when resetting the trip)
another quick press on T , it starts to blink.
I presume it waits for another input, but I can not find out whitch.
I know in some older vehicles “like my 2008 Jeep” you would turn the ignition on “not starting the engine” then depress the throttle fully to the floor 3 times within 10 seconds.
From another forum
1. Ignition key in ON position (engine OFF)
2. Press and release CRUISE ON. (Move switch to CRUISE ON)
3. Press the CRUISE RESUME switch 4 times (do not hold longer than half a second).
4. Press and hold the CRUISE RESUME switch a fifth time and hold for 3 seconds.
5. "Change Engine Oil" message is reset.
Cycle the ignition key switch and go back to step 2 if the procedure above does not reset the service interval
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.