Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Jacking fifth wheel

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

Jbgarrison6

RVF Regular
Joined
Oct 30, 2023
Messages
13
Manual for the dexter/lippert axles on our fifth wheel says not to jack camper using the axles. Says jack using the frame. Figured jacking close to the u-bolts shouldn't hurt. Any thoughts? Thanks
 
I'm not gonna say its ok, but i always used a block of hardwood and spanned both ubolts and jacked there, this was before I read not to do it, oops!
 
Seems to me that jacking by the frame would be worse. 🤔
Have the same opinion! Think the warning is due to the hollow axels. I jack at the spring mount for the axel,not on the axel itself.

On the frame I would use two jacks at the shackles to distribute weight. That is how I repacked the bearings on my friends silver liner.
 

Latest resources

Back
Top