Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

How To Loading motorcycle trike inToy Hauler

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web
My main problem is we have runningboards on it and we’re only about 5 1/2 inches off the ground. We’re still working on it. I think we’re gonna build something and then be able to winch it up into the toy hauler.
 
I went through the same issue with my Cyclone 44' TH and my Harley Trike. I could barely clear the top of the ramp without bottoming out, but I would drag my pipes when initially going up the ramp.

The only solution I found was to raise the front of my TH as high as I could. If I was still hooked up I would drive my dually up on a 2x12 block. If I wasn't hooked up then I would just use the front jacks and raise it. I made three wood ramps that went under the bottom of the OEM ramp which raised it about 4". Doing these two things flattened the angle of the OEM ramp out enough all was good.
 
Possible solution

 

Latest posts

Latest resources

Back
Top